Key features: - Replacement or extra mounts for all Bontrager Flare rear lights - Use to mount Flare lights to seatposts, racks, seatstays, or any other creative spot - Kit includes Flare light mount, two bases, and rubber strap adapters
Key features - Reflector mount for first and second generation Speed Concept seatposts - To use with a Bontrager Flare, use with the Bontrager Flare Horizontal Mounting Kit (sold separately)
- Rack mount bracket only - Fits TL-L225 taillight
Updated and more secure clothing clip for mounting CatEye safety lights.
- Replacement mounting straps for Sunlite lights - Choose specific model to fit your light
Key Features - Perfect for mounting compatible Flare taillights to rear rack - Includes a bolt and star washer for extra security - Easiest to install with light installed for better leverage
Key features: - Provide quick installation on handlebars, seatposts, and more - Fits all Ion headlights and Flare tail lights - Rear strap includes 16 degree offset for optimized use on seatposts - Rear strap works best with 27.2 - 31.6mm seatposts - Front strap works best with 22.2 - 35.0mm…
- For use with all Flare tail lights - Perfect for attaching to a seat pack, belt, backpack, or anything with a loop
Taillight Seat Stay Mount
- Fits 25.4-31.8mm handlebars - Compatible with Blaze, Beamers, 1200, 5000x and Super Spot
- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack
• Super bright LED & parabolic reflector • Visibility up to 1200 Feet • Universal arm, leg or bar fit • Weather proof design • Soft touch switch • Red reflective tape
- Mounts Beamer and Blaze 1/2W lights to a helmet - Compatible with Beamer 1, Beamer 3, Beamer 5, Blaze 1/2W and Blaze 2W Micro, Blaze 140 SL, Blaze 180 USB - Increased weight and length of Blaze 300, 500, and 650 USB lights may cause awkward mounting on helmet
- Fits seatpost (up to 31.8mm) or seatstay - Compatible with: Blinky 3,5,7, all Superflash lights and Blinky Safety rear light - Use with Blinky Safety Front light bracket to fit oversize (~31.8mm) handlebars
Optional Accessory Rear rack Bracket for mounting most CatEye Taillights to rear racks with 50/80 mm spaced mounting holes.
SP-12 Flex-Tight Seatpost Bracket for most CatEye taillights
- Mounts most AA flashlights to handlebars and helmets - Ideal low-cost lighting alternative for cyclists
Key features: - USB-to-Micro-USB cable to charge your rechargeable Bontrager lights - Cable is 1M (3.3ft) long
- Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis Superflash Micros and Blinky Safety rear light - Designed specifically for aero seat posts - Adjustable light angle - Easy on/easy off design makes for quick mounting and removal
- Quick Strap mounts, adjusts or removes in seconds without tools - Fits 25.4-35mm handlebars - Compatible with Blazes, Beamers, 1200 and Super Spot
- Compatible with seatpost diameter 20mm-36mm - Adjustable light angle - Easy on/easy off design makes for quick mounting and removal - Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis, Superflash Micros and Blinky Safety rear light
Others out on the roads and paths will see you when Sunlite's TL-L340 Taillight is on your bike. It sports 3 bright LEDs, steady and flashing modes, and a long run time.
• 1-Super bright LED • 2 modes (steady / flashing) • 150 hour run time • Water resistant • Multi-fit QR handlebar bracket • Includes (CR 2025) lithium battery
• 2 bright Red LEDs • Includes 2 (CR 2032) lithium batteries • 100 hour run time • 3 mode (2 flashing modes & steady mode) • Water resistant silicone body
The tool-free bracket allows for a wide variety of mounting options for MSW's TigerMoth headlight.
The original Mission Control Bracket is compatible with all Portland Design Works headlights and fits handlebars 22.0-31.8mm in diameter. It provides a rigid mount to keep your headlight exactly where you need it when the going gets rough. And, it allows the light to be rotated left or right a few…
The Portland Design Works Stayputnik tail light bracket has a UV-proof rubber strap to securely hold your tail light on nearly any size seat post. - Mounts in seconds and is compatible with every Portland Design Works tail light except Asteroid and Fenderbot. - UV proof rubber strap - Compatible…
Grab a set of Portland Design Works tail light brackets to mount your lights on seat posts and seat stays. - Seat post and seat stay brackets - Rubber shims included for a custom fit - Compatible with all PDW tail lights except Asteroid and Fenderbot
Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to…
• Compatible with all Flare taillights and Ion headlights from both Trek and Bontrager • Fits most bars/seatposts (22.2-31.8mm), some helmets and Madone integrated seat masts • Silicone body with a tooled adjustment handlebar clamp diameter • 20-degree +/- side-to-side adjustment • 16-degree…