Parts

CX Expert mechanical discs offer reliable braking and easy setup compatible with short pull road brake levers. - Bottom load, semi-metallic pads offer durability in muddy and wet conditions - Forged aluminum construction - Single piston - Includes 140mm or 160mm L-series rotor

- X101: hi-performance, chamfered, anti-drop, lightweight, Singlespeed chain for Mountain, BMX, Fixie, Track applications - Z410HD: heavy duty model has thicker sides plates for 25% higher tens

-X11SL DLC: superlight chain for use with 11-speed Campagnolo/Shimano/Sram with Diamond Like Coating for extra durability, 235g -X11SL: superlight chain for use with 11-speed Campagnolo/Shimano/Sram (Gold color is Ti Nitride coating), 235g

- Aheadset preload adjusting bolt

- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver

Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

- Longer B-screw needed when using 40t or 42t cog with most Shimano derailleurs

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

- Replacement cable anchor bolt for brakes - Includes nut and washer

Stainless steel pedal washers - Sold in pairs

- Aluminum w/lock nut - 18mm long/6mm O.D.

- Crank dust cap - Works with most three-piece crank models

- Crown Race - Size: 27.0mm

- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame

- Chrome - Sold individually

- Type: Lock washer - Size: 1" Keyed

- Routes cables underneath the bottom bracket - Will not rust or corrode

- w/Nut - 1-3/4-inch

- 8x1mm Allen head

- Model: Replacement bolt - Compatibility: Allen, M5x16

- Replacement retaining clip for the Surly Tuggnut/Snuggnut

Replacement M5 x 10 Socket Head Screw fastener for derailleur hangers. - Head Type: Socket Head Cap - Drive Type: Hex Socket - Thread Size: M5x0.8mm - Length Under Head: 10mm - Material: Stainless Steel - Hex Key Size: 4mm - Bag of 5

Brass compression olive for Hope hydraulic disc brakes.

- Rubber - Color: Black

Hope Pad Clip • Fits Tech and Tech Evo M4, X2, and V2 Brakes

Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC

Replacement M5 x 8 Flat Head Screw fastener for derailleur hangers. - Thread: M5-0.8 - Overall Length: 8mm - Material: Steel - Use with 3mm hex wrench - Bag of 5

Replacement M3 x 10 Socket Head Screw fastener for derailleur hangers. - Thread: M3-0.5 - Thread length: 10mm - Use with 2.5mm hex wrench - Bag of 5

Bleed fittings specifically designed for Hayes hydraulic disc brakes.