Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

Race Face 8.5mm Chainring Bolts/Nuts
$3.50
- Color: Black - Length: 8.5 mm - Material: Steel - Type: Hex - Includes: 4 bolts & 4 nuts
RockShox Reverb Hose Strain Relief
$3.60
Strain relief for servicing RockShox Reverb hydraulic lines. - Fits all generations of Reverb
Sunlite Replacement Stationary Grip Washers
$3.79
Designed for maximum comfort, ergonomics, & durability - Bag of 10
FSA Carbon SL Headset Spacer
$3.99
Weight-savings is no excuse to have an ill-fitting cockpit. Shave every possible gram with these Carbon Headset Spacers from FSA, and ensure your bike fit is right on the money.
FSA MegaExo Left Crank Bolt for 19mm MegaExo Cranks
$3.99
This is a MegaExo Left Crank Bolt for 19mm MegaExo Cranks. - M12 bolt
Jagwire Basics Derailleur Cable
$3.99
These double ended cables have a unique disc style head that fits Simplex/Huret and a normal Shimano/SRAM head. - Galvanized - Pre-stretched - Double ended - Cable Head: Shimano/SRAM, Huret/Simplex - Defined Color: Silver - Diameter: 1.2mm - Double Ended: Yes - Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters
Odyssey Cable Knarps
$3.99
- Sold in pairs. - Allen wrench included.
Odyssey Par Ends
$3.99
Odyssey's custom-designed Par Ends come standard with all of their grips. Its special plastic composite will not shatter like cheap bar ends do, and they’re very lightweight. The Par End is a combination of the over-the-bar-style cap and the inside-the-bar-style to prevent the inner portion from blowing out like it does on ordinary press-fit bar ends. Comes stock on all of Odyssey's grips.
Origin8 Keyed Lock Washer
$3.99
Threaded headset keyed locknut washer - Bag of 10
Sunlite 1-3/8-inch Outer Diameter Cartridge Bearings
$3.99
- Cartridge Bearing - 1-3/8-inch Outer Diameter
Sunlite Cantilever Brake Link Wire
$3.99
- Replacement link wire for cantilever brakes
Sunlite Replacement LH Cup
$3.99
Replacement LH cup for English threaded European bottom brackets. - Cup Material: Steel
Sunlite Steel Brake Cable Hanger
$3.99
- Replacement front cable hanger - Steel construction - Includes barrel adjuster - Steerer Diameter: 25.4mm
KMC Half Link Adapter
$4.00
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool
Shimano Deore XT M8000 Rear Derailleur Cable Anchor Assembly
$4.00
Shimano Rear Derailleur Cable Anchor Assembly - Fits SLX M7000-10
RockShox Reverb Brass Post Keys
$4.14
A new stet of post keys for your RockShox Reverb tightens up any rotational slop that may develop normally with use. - Fits all generations of Reverb and Reverb Stealth - Brass Key sizes are defined by the number of lines on the key. (Zero lines means a "Size 0" key, 3 lines means a "Size 3" key.)
Surly Singleator Pull-Up Spring
$4.20
- Replacement pull-up spring for the Surly Chain Tensioner
Surly Singleator Push-Down Spring
$4.20
Replacement push-down spring for the Surly Chain Tensioner
Wheels Manufacturing Inc. BSA Bottom Bracket Spacer
$4.25
Wheels Manufacturing 2.5mm Black Aluminum Bottom Bracket Spacers are for adjusting chainline or bearing play in English (BSA) or Italian threaded bottom brackets.
Hope Brass Hydraulic Hose Insert for Braided Hose
$4.28
Brass hose insert for Hope hydraulic disc brakes.
Sunlite BB Washer ISIS
$4.39
- Fits Shimano and ISIS BBs - 16mm ID x 20mm OD x 1.5mm Thick - Bag of 10
Hope Shroud for Black Brake Line
$4.48
Hope 5mm Standard Hose Kit with Fittings for Hope Brake
Sunlite Brake Cable w/Housing
$4.49
- Galvanized steel inner wire - Standard 5mm brake housing - Front or Rear
Wheels Manufacturing Inc. 30mm ID Crank Spindle Spacer
$4.50 - $6.25
Used to adjust crank chainline or ensure proper bearing preload when using 30mm spindle cranks. - Inner Diameter: 30mm - Outer Diameter: 41.5mm - Machined engineering-grade Delrin - Sold Individually
Origin8 Disc Rotor Bolts
$4.59
Origin-8's Disc Rotor Bolts are made of a corrosion-resistant steel, have Torx heads and come in a complete set of 6. They're perfect for attaching your disc brake rotor to the hub.
Sunlite Hex Head BB Axle Bolts
$4.59
- With plastic washers - Shell: 8mm Allen head axle bolt
AheadSet Crown Race
$4.60
- Crown races for servicing cane creek headsets and Aheadsets
Sunlite Seat Binder Bolt Cromo
$4.79
- Binder bolt - M6 x 45mm chromoly bolt - 13mm CNC alloy nut - Length: 45mm
Sunlite Specialty BB Axle Bolt
$4.79
- Large Flange-Fits Splined MX Cranks - Sold in pairs
Bontrager Canti Smooth Brake Pads
$4.99
- No metal compound in these pads - They won't be abrasive on your rims - Squeal-free compound
Bontrager Saddle Clamp
$4.99
- Saddle clamp for straight seatpost - Diameter: 22.2mm
Bontrager Universal Brake Cable & Housing Kit
$4.99
- All cables are pre-stretched - Low-friction, slick surface cables for smooth braking action - Can be used for road and mountain bikes - Stainless steel kit is rust-proof
FSA BB30 Wave Spring Washer
$4.99
It seems so small and insignificant, yet it's so important. The BB30 Wave Spring Washer is the keystone in your bottom bracket assembly, providing compression for proper setup and bearing preload, while helping to maintain adjustment after it's dialed in just right. They're also quite easy to lose or damage, so grab a few while you're at it.
Planet Bike Handlebar END Plugs
$4.99
Expandable 3mm hex bolt mounting plugs Keep your handlebar tape in place with these expandable bar end plugs to give a safe and protective finish for your bars. - Designed to fit standard diameter handlebars with an inner diameter of 18-25mm - Clean and protective finish for road and mountain bike handlebars - Easy to install with included 3mm hex wrench - Weight: 20 grams
SRAM PowerLock Link Chain Connector
$4.99
Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No
Salsa Alternator 2.0 Hardware Kit
$4.99 - $5.99
Hardware is specifically designed for, and only compatible with, Salsa frames using the Alternator 2.0 dropout system. - For use on 2017 and newer alternator 2.0 Adjustable plates only - Please reference hardware kit FS2351 for fixed position plates - Please reference hardware kit FS2350 for adjustable plates
Salsa Frame Plugs
$4.99
Frame Plugs for Internal Cable Routing
Salsa Single Frame Plug for Dropper Routing 5-pack
$4.99
Single Frame Plug for Dropper Routing
Stolen Thermalite Bar Plugz
$4.99
Unique design with Thermalite for durability. In-moldED Steel insert to eliminate bar punch through. Expands securely with a grub screw to fit tightly on regular, 9, 11, & 13 butt bars. - Expands securely with a grub screw to fit tight - Material: Thermalite - Weight: 1.0-ounces per pair
Sunlite Cantilever Boss
$4.99
- Standard replacement cantilever/v-brake bosses
Sunlite Gear Cable/Housing
$4.99
- Galvanized steel inner wire - Standard 5mm S.I.S. housing - Front or Rear - Mountain or road
Sunlite Handlebar Shims
$4.99
- Alloy construction - Great for Cruiser or BMX bar conversions
Sunlite Road Pad Inserts
$4.99
•55mm cartridge inserts •Compatible with most road caliper brake pad holders •All weather performance
Problem Solvers 1-inch Headset Spacers
$5.00 - $20.00
Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - S.H.I.S. Stem Clamp Diameter: 25.4mm
Salsa Alternator 1.0 Set Screws
$5.00
Alternator 1.0 Set Screws
Shimano Dura-Ace R9100 Rear Derailleur Cable Anchor Assembly
$5.00
Keep the cable fixed securely in your Dura-Ace R9100 rear derailleur with this Shimano Rear Derailleur Cable Anchor Assembly
Sturmey-Archer 3-Speed Sprocket And Circlip
$5.00
- 3-spline steel cogs for use with Sturmey 3-speed (and 5-speed) internal gear rear hubs - Flat or dished for tuning chainline. Xylan coating for greater durability
Sturmey-Archer Dished 3-Speed Sprocket And Circlip
$5.00
- 3-spline steel cogs for use with Sturmey 3-speed (and 5-speed) internal gear rear hubs - Flat or dished for tuning chainline. Xylan coating for greater durability
Zipp Vuka Aero Center Cap Bolt Kit
$5.04
Zipp Speed Weaponry Bolt Kits
Wheels Manufacturing Inc. Chainstay Protector
$5.25
Wheels Manufacturing Clear Chainstay Protector w/ Alcohol Prep Pad keeps your frame's paint looking good and helps quiet any chain slap on the chainstay.
Origin8 Chain Deflector
$5.39
- Anti chain-suck device - Allows the front derailleur to be adjusted for strong downshifts - If not using front derailleur the device can act as a chain guide
Jagwire Sport Slick Galvanized Shift Cable
$5.49
Jagwire's Sport Slick Galvanized Shift Cable is a fine shift cable made of galvanized steel for optimum shifting performance and durability.
Jagwire Sport Slick Stainless Mountain/Road Brake Cable
$5.49
Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - Double-ended SRAM/Shimano mountain and road compatible cable ends - Stainless steel construction resists corrosion - Double Ended: Yes - Cable Head: Shimano/SRAM Road , Shimano/SRAM Mountain - Defined Color: Silver - Quantity Included: 1
Jagwire Sport Slick Stainless Road Brake Cable
$5.49 - $13.49
Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.
Problem Solvers Hex Crank Arm Fixing Bolt/Cap
$5.49
Problem Solvers Crank Arm Fixing Bolts - 8mm - Sold as a pair
Black Ops BMX Turbo Grips
$5.59
- Best seller - Shock Absorbing Design - Ridged Turbo Shape - Fits 7/8" Bars - Style: with Flange - Length: 110mm
Campagnolo 11-Speed Indexed Ratchet
$5.90
This is the indexed ratchet needed for converting Campagnolo 11-speed rear derailleurs with a 27-tooth maximum tooth capacity to a 29-tooth maximum tooth capacity to work with 12-29 cassettes.
Wheels Manufacturing Inc. Ball Bearing Retainer
$5.95 - $16.50
Grade 300 retainer bearings for headset and bottom bracket service. - 10 Retainers/Bag
Black Ops Alloy Hex Headset Spacers
$5.99
- 10mm tall, hex shaped alloy spacers in a variety of colors - Compatible with 1-1/8" headtubes - Size: 1-1/8" x 10mm