Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Brakes/Levers/Pads

Cane Creek 200TT Carbon Brake Levers
$86.00
Cane Creek's 200TT Carbon Brake Levers are perfect for bullhorn-style bars and other TT base bars. Medium length and aerodynamic carbon levers and aluminum mounting brackets mean low weight and excellent longevity. There's even a rubber end plug that perfectly sized for your thumb!
Cane Creek Direct Mount eeBrake
$315.00
The eeBrake G4 is the fourth generation of the legendary eeBrake featuring 100% CNC machined parts, a wider design optimized for 22 – 28mm rims, stiffer black arch spring, a revised one-piece center adjuster with built in resistance for easier use and ghosted laser etching that will stand the test of time – all with the same extraordinary stopping power and light weight that you’ve come to rely on from eeBrakes. REMARKABLY POWERFUL, POWERFULLY LIGHT The eeBrake is the ultimate brake from start to finish – a uniquely robust patented design developed and refined by relentless engineering, both at the computer and through real-life testing. At half the weight than that of its competitors, eeBrakes continue to set new standards by which all other high performance road brakes are judged. The same supreme upgrade for performance-oriented riders, a dramatically higher overall stiffness provides better modulation and more power. No detail has been overlooked, greater tire clearance and tool-less pad centering make installation simple. PERFECT CABLE ALIGNMENT The all-new titanium eeBrake cable adjuster pivots as the brake is applied, optimizing cable alignment during brake actuation. Also, the cable housing extends to lower tip of the cable adjustment screw eliminating added friction. That means, as the brake lever is squeezed, you get even and friction-free braking power. AERODYNAMIC Cross Cable Path aligns the brake cable over the center of the brake. This alignment provides a graceful, clean line and moves cables into the “wind shadow” of the frame, providing an aerodynamic advantage over traditional brakes with their cables and lever arms off to one side of the caliper. EASY PRECISION The tool-less adjustability provides super precision and pad motion consistency through the patented “Link” pad travel proportioning system. No annoying pad rub and constant need to re-center. No more re-adjusting the main fixing bolt after initial installation or using spring tensioning screws to align the brake pads. QUICK & SIMPLE One simple flip of the lever on the Quick Strut release opens wide enough to easily clear a 31mm tire allowing easy wheel removal. Change pads with ease using our patented system via Shimano style pads allowing for easy pad installation and removal without the use of tools. MATERIALS - CNC High Grade Aluminum, Titanium, and Stainless Steel RIM WIDTH COMPATIBILITY - 19mm to 28mm ADJUSTMENTS - Tool-free caliper centering adjustment - Wheel removal - quick release - Titanium Barrel adjuster w/ retention O-ring - T-25 Trox pad holder / cable clamp LEVERAGE COMPATIBILITY - Optimized to work with Shimano, Campagnolo, and SRAM levers LOGO BADGES - Two stage anodized engraved aluminum ee badge WEIGHT DIRECT MOUNT - 78.4 grams* (Front) - 78.2 grams* (Rear) *Pads not included WARRANTY - 3 Years
Electra Ticino Cyclo-Tourist Bar End Brake Lever Set
$59.99
Electra's beautiful aluminum Ticino Cyclo-Tourist Bar End Brake Lever Set feature a throw-back style that will complement your vintage ride perfectly. They are specifically designed to work with Electra's Ticino Cyclo-Tourist handlebar (sold separately).
FSA Disc Brake Rotor
$74.99
- K-Force rotors feature a two piece design balancing weight and braking performance. Weight relieved alloy carrier for added rotor stiffness - Afterburner rotors have an increased surface area for better heat management - Rotors include: (1) 6-bolt/44mmBCD rotor with (6) T-25 rotor mounting bolts - 98g K-Force, 142g Afterburner
Hayes CX Expert Disc Brake w/ Rotor
CX Expert mechanical discs offer reliable braking and easy setup compatible with short pull road brake levers. - Bottom load, semi-metallic pads offer durability in muddy and wet conditions - Forged aluminum construction - Single piston - Includes 140mm or 160mm L-series rotor
Hayes Banjo Bolt
$2.88
Replacement banjo bolt for Hayes hydraulic Brake systems.
Hayes G1/G2 Piston Kit
$8.72
Miscellaneous replacement small parts for Hayes hydraulic disc brake systems. - Includes piston and seal
Hayes Caliper Mounting Bolts
$9.00
Caliper Mounting Bolts for Hayes hydraulic disc brake systems.
Hayes Caliper Rebuild Parts
$10.60 - $42.00
- Hayes service parts for calipers - Rebuild kits include: (2) caliper pistons with square profile seals, transfer port o-ring, and caliper bleeder with cap
Hayes HB Stroker Ryde/Trail/Carbon Bleed Port Plug
$11.51
Externally fitting service parts for Hayes hydraulic disc brake master cylinder
Hayes Stroker Trail/Carbon Brake Lever Pivot Pin Kit
$12.60
Replacement levers pivots pion kit for Hayes hydraulic disc levers
Hayes Stroker Trail/Carbon Push Rod Kit
$13.45
Internally fitting service parts for Hayes hydraulic disc brake master cylinders
Hayes HFX-MAG Compression Bushing
$15.75
Hose fittings for Hayes hydraulic disc brakes
Hayes Caliper Adapter
$16.80
For use with 2000+ Hayes 74mm eye-to-eye calipers (adapters/calipers for 22mm mounts are no longer available) - (IS) International Standard 51mm tabs; (QR) Quick Release; (TA) thru-axle - Note: Fox-36/40 (thru-axle), Rock Shox Pike (Maxle), and Psylo (Tullio) axle forks use IS-QR adapters
Hayes Disc Brake Pads
$21.00
- T100 Sintered Metallic: long-life, all-condition compound - T106 Semi Metallic: no-bed, shorter-life, quieter compound - Set includes one pair of pads with retention clip
Hayes Prime Master Cylinder Lever Pivot Pin
$21.00
Replacement master cylinder pivot pin for Hayes hydraulic disc levers
Hayes Master Cylinder Guts Kit
$23.18
- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts
Hayes Dyno Brake Caliper Assembly
$42.00
Replacement hydraulic brake caliper assembly for Hayes Dyno Comp and Sport brakes.
Hayes Hydraulic Tubing Kits
$42.00
Kevlar reinforced (black) hydraulic tubing: DOT-3/4/5.1 compatible - Prime Series kits are for Prime Pro, and Prime Expert brakes only - Stroker Ace/Gram/Carbon/Trail and El Camino kit includes specific fittings for lever and caliper (not for Stroker Ryyd - HFX-Mag/G2 kit includes a pre-crimped inline caliper fitting and specific HFX-Mag lever attachment (can be used with older G1 caliper if angle warrants fit) - HFX-9 kit includes a pre-crimped inline caliper fitting with specific HFX-9 lever attachment - Sole and Stroker Ryde kit includes specific fittings for lever and caliper - Tubing parts that fit HFX-Mag also fit Original, DH, FR, and Comp systems
Hayes Rotor Kit
$42.00 - $52.50
- Prime 2-piece rotors are for Prime Pro and Expert brakes only - L-series, lightweight one piece rotors - V-cut profile steel rotors for optimum weight-to-performance ratio. Increased surface area over previous designs increases power while cutouts and drillings help keep pads clean - Rotors includes: (1) 6-bolt/44mmBCD rotor, (1) Torx wrench, and (6) T-25 rotor mounting bolts with thread retaining compound - 205g @ 203mm
Hayes Master Cylinder Assembly for Prime Comp Disc Brake
$78.75
Complete replacement master cylinder assemblies for Hayes hydraulic disc brakes
Hayes Prime Expert Disc Brake Master Cylinder
$78.75
Complete replacement master cylinder assemblies for Hayes hydraulic disc brakes
Hayes Prime Comp
$129.00
Prime Comp brakes feature tool-free reach adjust and a predictable, linear lever throw for better control across a variety of trails. - Leverage increases throughout the stroke, for better modulation and higher power at the end - Crosshairs Alignment system allows precise adjustment of caliper position - Improved tool-free reach adjustment providing a fixed mechanical advantage regardless of lever position
Hope 6mm Copper Seal Washer (Bag of 10)
$1.90
Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder
Hope Copper Washer for 5mm or Stainless Line (Bag of 10)
$1.90
Replacement copper washers for 5mm or stainless Hope hydraulic brake line.
Hope Brass Compression Olive
$2.39
Brass compression olive for Hope hydraulic disc brakes.
Hope X2 M4 V2 Mono Moto Pad Disc Brake Pads Clip
$2.40
Hope Pad Clip • Fits Tech and Tech Evo M4, X2, and V2 Brakes
Hope Reservoir Cap Screw Brake Lever
$3.00
Replacement reservoir cap screw for Hope brakes.
Hope Brass Hydraulic Hose Insert for Braided Hose
$4.28
Brass hose insert for Hope hydraulic disc brakes.
Hope Shroud for Black Brake Line
$4.48
Hope 5mm Standard Hose Kit with Fittings for Hope Brake