Rims

- Rubber rim strips sold in bundles of 50

Make your WTB rims air tight and ready for tubeless use with WTB's TCS Rim Tape. This tape covers the spoke holes and can be used as a lightweight rim tape in any rim. Available in 11-meter (covers 5 rims) and 55-meter rolls (covers 27 rims).

- To be used exclusively with Bontrager 29""/700c Tubeless Ready (TLR) wheels - TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion - Rim Strip replacement is recommended if removed from the wheel

- To be used exclusively with Bontrager 29""/700c Tubeless Ready (TLR) wheels - TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion - Rim Strip replacement is recommended if removed from the wheel

• Original equipment Bontrager AT series rims • Double wall construction • Disc brake compatible • Pinned seam • Presta valve • Aluminum • 32 holes

PRODUCT SPECS: - 28 or 36 hole count - 21.6mm wide Sleeved - 20x1 3/8, 24x1 3/8 - 340g , 395g

- Size : 700c - Model : Bontrager Approved TLR Disc - Holes : 24 - ERD : 598mm - Color : Black - Finish : Anodized - Type : Tubeless/Clincher - Valve : Presta - FT/RR/PR : Dual - Rim : Symmetric - Weight : 525g

- Original equipment replacement rims for Bontrager Nebula wheels - Pinned Seam - Presta Valve

The QUADRANT uses a unique pinned junction design that allows Odyssey's lightest rim to also be their most affordable. With its offset spoke drilling, this rim is stronger than its weight suggests. The Quadrant is one of the few pinned rims that receives regular and unquestioned use by pro level riders. SPECS - 6000 series aluminum - Width: 34mm - Height: 18mm - ERD: 392mm - 36-H - 20 inches - 420 grams (14.8 oz)

Origin-8's Track Attack Rims are 42mm-deep and made of light and durable aluminum sleeved and pinned for strength.

The Logic rim uses a wider 35mm profile with a thick sidewall, which makes the rim strong and resilient to sideways impacts that can happen from anything between under-rotating a flair or over-rotating a hard 360 out of a rail. - Very strong reinforced spoke hole design - Extra-thick sidewalls to resist denting under harsh conditions

Origin-8's DNZ18 is a lightweight 700 x 22c aero aluminum clincher rim. It has machined sidewalls for great braking and the spoke holes are reinforced with eyelets for durability.

- 42mm DEEP DISH sleeved and pinned rim - Powder coated (PC) or Anodized finish(Ano) dependent on color - Available with Machined or Non-Machined sidewall - 760g

Product specs: - 36 hole count - Front and rear specific - 28.5mm wide - Welded - 20", 24" - 395g front rim 392g rear rim - Also available in 24", black only

- AL6061-T6 alloy construction - Post-production anodized in a sanded gloss black finish - Available in 2 profile options - Tubeless ready - Disc brake only - Sleeved joint - ISO-Road certified Specs: - ISO: 622 - Wall: Dbl - Side: Disc - Valve: Pv - Tire Compatibility: Tubeless Compatible High Profile: - Width ID: 19 - Width OD: 22.6 - Profile: 30 - Weight: 400g - ERD: 577 Low Profile: - Width ID: 17 - Width OD: 22.3 - Profile: 22 - Weight: 410 - ERD: 594

- AL6061-T6 alloy construction - Post-production anodized in a sanded gloss black finish - Available in 2 profile options - Tubeless ready - Disc brake only - Sleeved joint - ISO-Road certified - ISO: 622 - Wall: Dbl - Side: Disc - Valve: PV - Tire Compatibility: Tubeless Compatible High Profile: - Width ID: 19 - Width OD: 22.6 - Profile: 30 - Weight: 400g - ERD: 577 Low Profile: - Width ID: 19 - Width OD: 22.6 - Profile: 30 - Weight: 410g - ERD: 594

- AL6061-T6 alloy construction - Post-production anodized in a sanded gloss black finish - Available in 2 profile options - Tubeless ready - Sleeved joint - ISO-Road certified - ISO: 622 - Width ID: 17 - Width OD: 22 - Wall: Dbl - Side: MSW - Valve: PV - Tire Compatibility: Tubeless Compatible High Profile: - Profile: 35 - Weight: 550g - ERD: 568 Low Profile: - Profile: 24 - Weight: 435g - ERD: 589

Performance hoops purpose-built for kids! SPANK Industries’ SPOON 28 rims are the perfect solution to upgrade your kid’s MTB. Manufactured from light yet durable 6-series alloy, the SPOON 28 rim is a safe, strong, performance-enhancing hoop, with a moderate width that accepts most 20-inch tires. Unlike the majority of 20-inch rims on the market, SPOON 28 rims were designed specifically for junior shredders on 20-inch mountain bikes. Key Technologies: Bead Nip Tubeless: Not recommended ERD (mm++): 382 ETRTO (mm): 406x23 Discipline: Kids

- Original equipment replacement rims for Bontrager Race Lite wheels - Welded Seam - Presta Valve

The Odyssey Litehouse Rim is both light and strong, with super-thick angled sidewalls to minimize the risk of damage when you hang up. The rim features a wider cross-section than normal to compliment modern tire widths. Designed as a semi-brakeless rim that can be run front or rear. When brakes are used, be sure to adjust the pads so they avoid making contact with the tire’s sidewall, as usual. Features: - Precision welded joint - 6000 series aluminum Specs: - Width: 35mm - Height: 21mm - ERD: 388mm - Weight: 475 grams (16oz)

- AL6061-T6 alloy construction - Post-production anodized in a sanded gloss black finish - Eyeletted spoke holes - Tubeless ready - Disc brake only - Sleeved joint - ISO-Mountain certified - ISO: 584 - Width ID: 27 - Width OD: 32.2 - Profile: 20 - Wall: Dbl - Side: Disc - Valve: PV - Weight: 490g - ERD: 559 - Tire Compatibility: Tubeless Compatible

- AL6061-T6 alloy construction - Post-production anodized in a sanded gloss black finish - Eyeletted spoke holes - Tubeless ready - Disc brake only - Sleeved joint - ISO-Mountain certified - ISO: 584 - Width ID: 23 - Width OD: 28.4 - Profile: 18 - Wall: Dbl - Side: Disc - Valve: PV - Weight: 440g - ERD: 563 - Tire Compatibility: Tubeless Compatible

- AL6061-T6 alloy construction - Post-production anodized in a sanded gloss black finish - Eyeletted spoke holes - Tubeless ready - Disc brake only - Sleeved joint - ISO-Mountain certified - ISO: 622 - Width ID: 23 - Width OD: 28.4 - Profile: 18 - Wall: Dbl - Side: Disc - Valve: PV - Weight: 465g - ERD: 601 - Tire Compatibility: Tubeless Compatible

- AL6061-T6 alloy constuction - Post-production anodized in a sanded gloss black finish - Tubeless ready - Disc brake only - Pinned joint - ISO-Mountain certified - ISO: 584 - Profile: 18 - Wall: Dbl - Side: Disc - Valve: PV - ERD: 564 - Tire Compatibility: Tubeless Compatible 40mm Width: - Width ID: 35 - Width OD: 40 - Weight: 560g 45mm Width: - Width ID: 40 - Width OD: 45 - Weight: 650g 50mm Width: - Width ID: 45 - Width OD: 50 - Weight: 730g

- AL6061-T6 alloy construction - Post-production anodized in a sanded gloss black finish - Tubeless ready - Disc brake only - Pinned joint - ISO-Mountain certified - ISO: 622 - Profile: 18 - Wall: Dbl - Side: Disc - Valve: PV - ERD: 602 - Tire Compatibility: Tubeless Compatible 40mm Width: - Width ID: 35 - Width OD: 40 - Weight: 600g 45mm Width: - Width ID: 40 - Width OD: 45 - Weight: 695g 50mm Width: - Width ID: 45 - Width OD: 50 - Weight: 738g

Upgrade hoops for your kid's 24” MTB. The SPOON 28-24 is a durable six series alloy rim model featuring SPANK’s patented OohBah profile design. A 23mm internal width accepts a wide range of 24” tires from street to DH. Whether you’re looking to spruce up your street bike, or out to upgrade your kid’s MTB, SPOON 28-24 rims are an ultra-strong, ultra-safe option at a value oriented price. Key Technologies: OohBah Tubeless: Not recommended ERD (mm++): 474 ETRTO (mm): 507x23 Discipline: Kids

Race Face's popular AR rims have been updated for 2019 with an asymmetric rim profile, improving spoke tension balance and overall wheel build quality and durability. The rim extrusion has also been improved to increase impact performance for more aggressive applications. With a tubeless compatible rim profile and color match capabilities, these rims are ready for any build you can throw at them. - Offset nipple bed for improved spoke tension balance and wheel strength/stiffness - Tubeless ready with strong tire retention bead

Race Face's popular AR rims have been updated for 2019 with an asymmetric rim profile, improving spoke tension balance and overall wheel build quality and durability. The rim extrusion has also been improved to increase impact performance for more aggressive applications. With a tubeless compatible rim profile and color match capabilities, these rims are ready for any build you can throw at them. - Offset nipple bed for improved spoke tension balance and wheel strength/stiffness - Tubeless ready with strong tire retention bead

• Size: 26 x 4.0 • ISO: 559 • Double Wall Construction • Non-machined Side Wall • Color: Black • Drill: 36 • Weight: 1,579 grams • Width: 100mm • Rim depth: 29.5mm

• Size: 26 x 4.0 • Double wall construction • Non-machined sidewall • Color: Black • Drilling: 32 or 36 • Width: 65mm • Depth: 21mm